← All products

Check ValveDrain Check Valve

A product installed on PVC and SUS Drain Lines that drains by natural gravity, without a separate driving module such as air, and prevents backflow in the pipe.

Drain Check Valve side views — PVC Type (ADV-25A-CT-A) on the left, SUS Type on the right
Feature
  • Materials selected for chemical resistance, and easy installation.
  • Natural drainage and backflow prevention.
  • Prevents fumes from entering from below.
Function
Check Valve (1″ Drain pipe, external type) – Design / Utility Model registered① Drainage② Preventing fumes from entering from below③ Preventing backflow from below
Type
  • PVC Type
  • SUS Type

SpecificationProduct Specification

ADV-□□A-CT-□□PVC Type
ADV-25A-CT-A (PVC) side, top and bottom photos and cross-section with numbered parts

Configuration

PVC Type Configuration
NO.Description
①BODY
②SEAL CAP
③SPRING FIX CAP
④SPRING

Model Specification

PVC Type Model Specification
MODELADV-25A-CT-AADV-25A-CT-JADV-20A-CT-JADV-15A-CT-J
Applicable size1″ (ANSI)25A (JIS)20A (JIS)15A (JIS)
Length84~86mm84~86mm100mm100mm
Outer diameter40Φ
Inner diameterΦ33.3Φ32Φ26Φ22
TemperatureRoom temp. ~ 45°CRoom temp. ~ 75°C
Backflow pressure4kgf/㎠ ▼
ConnectionPVC BondingC-PVC Bonding
Body materialPVCC-PVC
ADV-□□A-CT-SSUS Type
ADV-25A-CT-S (SUS) side, top and bottom photos and cross-section with numbered parts

Configuration

SUS Type Configuration
ItemDescriptionMaterial
①LOK NUT316SS
②BODY316SS
③INSERT316SS
④O-RINGFFKM (Perfluoro)
⑤GASKETPTFE-coated 316SS
⑥POPPET316SS
⑦SPRING304SS

Model Specification

SUS Type Model Specification
MODELADV-25A-CT-SADV-20A-CT-SADV-15A-CT-S
Applicable size1″ (25.4Φ)¾″ (19.05Φ)½″ (12.7Φ)
Length120mm110mm80mm
Temperature0 ~ 100°C
Backflow pressure5kgf/㎠ ▼
ConnectionLOK NUT

※ This page provides a general introduction to the product, and specifications and configurations are subject to change. Please contact us for the latest specifications and detailed application conditions.